HydrauliekService logo
TECHNICAL PRODUCT SHEETGegenereerd op: 09-11-2026
Hydraulic parts · Technical product information

AFC332

Blindflens 2" met groef
Afbeelding van het artikel
Article image
SAE afdek-/blindflens – technische maatvoeringHydrauliekService technical line drawing with front and side views. A and B are center-to-center bolt distances, with matching flange heads C and E. Not to scale. Front viewSide view / cross-section AB K A × B: bolt hole center distancesPlate thickness K is determined individually for each item.Schematic scale illustration · Not to scale
A/B van het SAE-boutpatroon; C/E horen bij de bijpassende flenskop, niet bij de werkelijke plaatdikte. A = 42,9 mm · B = 77,8 mm · C = 71,4 mm · E = 9,5 mm · Plaatdikte K = 20 mm. Schematische tekening, niet op schaal. Controleer productuitvoering en passende flenshelften.

Technical specifications

Product typeCover plates
Flange3000 PSI
Nominal flange size2""
Dashmate-32
O-ring grooveWith groove
Horizontal bolt spacing (A)42.9 mm
Vertical bolt spacing (B)77.8 mm
Matching flange head diameter (C)71.4 mm
Matching flange head thickness (E)9.5 mm
Corresponding metric bolt sizeM12x45
Corresponding bolt size UNC1/2-13 x 1-3/4
Actual plate thickness (K)20 mm

Always check the correct connection, sealing, and suitability for the application during installation. Properties not listed, including an unconfirmed working pressure, are not automatically suitable or approved. This sheet is based on currently verified product data.